EUTEC™ MF / AM series product description
Glass Fiber + PET unwoven Economy typeA-GEM/A-GAE
For filtration of general mineral oils and synthetic oils
| (1) Applications | Filtration of general mineral oils and synthetic oils, etc. |
|---|---|
| (2) Characteristics | A low-cost alternative to the A-GPE series, with fewer component parts |
| (3) Materials | Glass fiber + PET + PP |
| (4) Filter rating | abs 1.0μm ~ 30μm |
| (5) Dimensions | OD (outer diameter) φ70 x 10 inch ~ 30 inc |
| (6) Max. operating temperature | 80℃ (*may vary depending on target fluid) |
| (7) Max. operating pressure | 0.49MPa |
Materials
A-GAM
| 1. Gasket |
Polypropylene (PP) |
|---|---|
| 2. Plate |
Polypropylene (PP) |
| 3. Net |
Polyester (PET) |
| 4. Secondary filter media |
Inorganic fiber |
| 5. Main filter media |
Polyester (PET) |
| 6. Secondary filter media |
Polypropylene (PP) |
| 7. Support net | Polypropylene (PP) |
| 8. Internal casing |
A-GAE
| 1. Plate |
Polypropylene (PP) |
|---|---|
| 2. Secondary filter media | Polyester (PET) |
| 3. Main filter media |
Inorganic fiber |
| 4. Secondary filter media |
Polyester (PET) |
| 5. Internal casing |
Polypropylene (PP) |
| 6. Gasket |
Specifications
| A-GAM/A-GAE series | 022 | 045 | 100 | 300 | 500 | 10E | ||
|---|---|---|---|---|---|---|---|---|
| Absolute filter rating (μm) | 1.0 | 3.0 | 6.0 | 12 | 20 | 30 | ||
| Dimensions | Overall length (mm) |
A-GAM | 10inch(250mm) 20inch(500mm) 30inch(750mm) | |||||
| A-GAE | 10inch(250mm) 20inch(500mm) 30inch(750mm) | |||||||
| Outside diameter (mm) |
70 | |||||||
| Inside diameter (mm) |
25.9 | |||||||
| Filter surface area (cm2) | 3200 | 3500 | 3600 | 3700 | ||||
| 3400 | 3700 | 3750 | 3900 | |||||
| Max. operating temperature (℃) | 80 | |||||||
| Max. operating pressure (MPa) | 0.49 | |||||||
* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.
Model code
a～c
| Filter rating | |
|---|---|
| Code | Rating |
| 022 |
abs. 1.0μm |
| 045 |
abs. 3.0μm |
| 100 |
abs. 6.0μm |
| 300 | abs. 12μm |
| 500 | abs. 20μm |
| 10E | abs. 30μm |
d1
| Length indicator |
|
|---|---|
| Code | Length |
| 1 |
10 inch |
| 2 |
20 inch(gasket) |
| 9 |
20 inch (O-ring) |
| 3 | 30 inch |
d2
| Length indicator |
|
|---|---|
| Code | Length |
| 1 |
10 inch |
| 2 |
20 inch |
| 3 | 30 inch |
e
| Seal shape | |
|---|---|
| Code | Shape |
| F | Flat DOE |
| T | 226 O-ring SOE Fin○ |
| P | 226 O-ring SOE Fin× |
| W | 222 O-ring SOE Fin○ |
| M | 222 O-ring SOE Fin× |
- DOE；Double Open End
(both ends open) - SOE；Single Open End (bottom end open)
- Fin○；Finned
- Fin×；Finless
f
| Gasket / O-ring material |
|
|---|---|
| Code | Material |
| N |
NBR |
| S |
Silicon |
| E |
EPR |
| V |
FPM |
| T | PTFE (gasket) |
| F | PFA capsule (O-ring) |
| R | Soft PTFE (gasket) |
Flow rate / pressure drop characteristics
Contact us
