EUTEC™ MF / AM series product description
100% polypropylene Economy typeAMP
Filters that achieve high cost-performance, with all parts made from PP (including gaskets)
| (1) Applications | Filtration of acids, alkalis and various organic solvents |
|---|---|
| (2) Characteristics | 100% PP economy-type filters that use integral, single-piece molding with long unwoven fiber |
| (3) Materials | PP |
| (4) Filter rating | abs 1.5μm ~ nom 80μm |
| (5) Dimensions | OD (outer diameter) φ70 x 10 inch ~ 30 inc |
| (6) Max. operating temperature | 80℃ (*may vary depending on target fluid) |
| (7) Max. operating pressure | 0.49MPa |
Materials
| 1. Gasket |
Polypropylene (PP) |
|---|---|
| 2. Plate |
Polypropylene (PP) |
| 3. Net |
Polypropylene (PP) |
| 4. Secondary filter media |
Polypropylene (PP) |
| 5. Main filter media |
Polypropylene (PP) |
| 6. Support net |
Polypropylene (PP) |
| 7. Internal casing |
olypropylene (PP) |
Specifications
| AMP series | 015 | 020 | 030 | 040 | 060 | 01X | 03X | 05X | |
|---|---|---|---|---|---|---|---|---|---|
| Absolute filter rating (μm) | a 1.5 | a 2.0 | a 3.0 | a 5.0 | a 6.0 | a 7.0 | a 10 | a 23 | |
| Dimensions | Overall length (mm) |
10inch(252mm) 20inch(499mm) 30inch(744mm) | |||||||
| Outside diameter (mm) |
70 | ||||||||
| Inside diameter (mm) |
25.9 | ||||||||
| Filter surface area (cm2) | 3000 | 4000 | 4200 | ||||||
| Max. operating temperature (℃) | 80 | ||||||||
| Max. operating pressure (MPa) | 0.49 | ||||||||
| AMP series | 10X | 30X | 40X | 50X | 60X | 70X | 80X | |
|---|---|---|---|---|---|---|---|---|
| Absolute filter rating (μm) | a 30 | a 42 | a 40 | n 50 | n 60 | n 70 | n 80 | |
| Dimensions | Overall length (mm) |
10inch(252mm) 20inch(499mm) 30inch(744mm) | ||||||
| Outside diameter (mm) |
70 | |||||||
| Inside diameter (mm) |
25.9 | |||||||
| Filter surface area (cm2) | 4200 | 2700 | 3900 | |||||
| Max. operating temperature (℃) | 80 | |||||||
| Max. operating pressure (MPa) | 0.49 | |||||||
* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.
* [Filter rating] a= absolute, n = nominal rating
Model code
a～c
| Filter rating | |
|---|---|
| Code | Rating |
| 015 |
abs. 1.5μm |
| 020 | abs. 2.0μm |
| 030 | abs. 3.0μm |
| 040 | abs. 5.0μm |
| 060 | abs. 6.0μm |
| 01X | abs. 7.0μm |
| 03X | abs. 10μm |
| 05X | abs. 23μm |
| 10X | abs. 30μm |
| 30X | abs. 42μm |
| 40X | abs. 40μm |
| 50X | abs. 50μm |
| 60X | abs. 60μm |
| 70X | abs. 70μm |
| 80X | abs. 80μm |
d
| Length indicator |
|
|---|---|
| Code | Length |
| 1 |
10 inch |
| 2 |
20 inch (O-ring) |
| 9 |
20 inch (gasket) |
| 3 | 30 inch |
e
| Seal shape | |
|---|---|
| Code | Shape |
| F |
Flat DOE |
| M |
222 O-ring SOE Fin× |
- DOE；Double Open End
(both ends open) - SOE；Single Open End
(bottom end open) - Fin×；Finless
f
| Gasket / O-ring material |
|
|---|---|
| Code | Material |
| N |
NBR |
| S |
Silicon |
| E |
EPR |
| V |
FPM |
| T | PTFE (gasket) |
| F | PFA capsule (O-ring) |
| R | Soft PTFE (gasket) |
Flow rate / pressure drop characteristics
Contact us
